Also effective for fall prevention, magnetic clip to prevent wired earphones from getting tangled-Keitai Watch
One of the pain points of using wired earbuds is that the cables tend to get tangled. It's easy to wind up, but when you take it out, it's a mess, and it's not uncommon for it to take minutes to start playing music.
The Radius earphone magnet introduced this time can be at least a countermeasure for such cases. By attaching this to the cable of the earphone, it is a product that attracts the left and right cables of the earphone with a magnet.
I chose black this time, but there are 9 color variations and 2 rich colors are included. This is the state where the left and right parts are combined and the left and right parts are separatedEasy to use, just insert the cable into the slit of the main unit. After that, when the distance between the cables is brought closer, the magnetic force of the magnet automatically sticks them together. Unlike powerful neodymium magnets, the magnetic force is so weak that it can be removed by pulling it lightly, but by attaching it, the left and right cables can be stored in alignment, reducing the chance of tangling. That's why.
Side view. There is a slit to pass the cable through. When attached to an earphone cable that fits the diameter of Φ1.6 to 1.8mm. The left and right cables can be attached like thisAlso, wireless earphones with left and right pieces connected by a cable tend to fall off when you squat down if you temporarily hang them on your shoulder, but with this product attached, If you put it on, you can attach the left and right cables in front of your neck, which helps prevent falling accidents. In addition, when walking or jogging, you can prevent the excess cable from rubbing against your clothing and making an unpleasant sound.
separated state. If you bring them close to each other, you can reduce the chances of the cable getting tangled.There are two sets in the package, so you can divide them between two people, or you can attach them to two places on one earbud to keep them short. It would be good to make it possible to adsorb at intervals. There are 9 color variations, so it would be nice to choose one that matches the earphones you have.
Since it is a set of 2, you can also use it by attaching it to the tip and base.Product name | Actual selling price | Publisher |
---|---|---|
HP-CMC01 Earphone Magnet | 715 Yen | Radius |