Victor, the first "wooden diaphragm" completely wireless.High -resolution equivalent to K2

JVC Kenwood will launch the HA-FW1000T in November in early November, which uses the first wireless earphone as a Victor brand earphone.The price is open price, and the estimated over -the -counter price is around 39,600 yen.When transmitted by non -high -resolution Bluetooth codec, the K2 technology that expands to high -resolution on the earphone side is also built in.

A product developed for users who are not satisfied with the sound quality of TWS and are used for users seeking high-quality sound quality, the same as those used in the wired wooden dynamic plate earphone "HA-FW10000".A 11mm diameter diameter is used.

"The reproducibility and spatial expression of the details that could not be reached with the complete wireless so far, no matter how much the volume was raised, I would not be tired of listening, I want to listen to it forever. There is no habit from high to low, and I can listen comfortably forever.Aim for sound. "

In addition, engineers of Victor Studio participate in sound quality tuning.It is said that it is a "good sound that professionals have recognized", which injects knowledge about the sound.

The diaphragm used for the driver is a wood dome carbon diaphragm.Although the sound speed was low, it was based on a PET with a moderate internal loss, and the combination of innocent wood (karaga) with a sound speed close to metal, resulting in a high sound speed and a large internal loss.If the sound speed is fast, the sound can be expressed even a fine sound, and if the internal loss is large, the unique sound of the material will be eliminated, and the sound tends to be clear.

Furthermore, by applying carbon coating, it is said to be finished in a clearer tone diaphragm.

The driver case that protects the driver is also a stainless steel drivercase equivalent to a wired high -class model, eliminating the taste of the sound.In addition, TWS needs to have a built -in battery and substrate inside, and there is little room for space, but an independent acoustic chamber is installed on the back of the unit to increase the sound quality.It is said that it has a margin from low to high frequencies.

Bluetooth codec supports SBC, AAC, aptX, and AptX Adaptive Audio.If the smartphone side is compatible when using AptX Adaptive, it can be transmitted at 96kHz/24bit.

In addition, if you are using a codec that cannot be transmitted with high -resolution sound quality, you can use a high -quality sound quality "K2 technology" born from Victor Studio, which extends the audio to high -resolution equivalent and approaches the original sound.TWS using the technology is the first time.When expanded, convert to 96kHz/24bit.In addition, the user can use K2.However, at the time of AptX Adaptive's 96kHz/24bit transmission, K2 is OFF.

A new earpiece is used to improve the sound quality.It is named "Spiral Dot PRO", and the spiral dot is placed inside the same as the conventional piece "Spiral Dot", which spreads the reflected sound in the earpiece and balance directly with the sound.By optimizing, the sound is suppressed.

In addition to this, the Spiral Dot Pro is equipped with a convex protrusion inside.The overall form is modified, enhancing the reproducibility to a more delicate sound.In addition, a soft grade silicone material is used to improve the feeling of wearing and the degree of sealing.The size comes with S/MS/M/ML/L.

We are particular about volume adjustment, and adopt 100 volumes steps.It is said that it can be adjusted perfectly to the desired volume in 1dB units.

Equipped with active noise canceling function.The adaptive noise cancellation of Qualcomm is used, and the noise from the installed feed forward microphone and feedback microphone is used to correct it to achieve high NC performance.In addition, it always monitors the degree of sealing of the earpieces, automatically corrects, even if the installation is shifted, and always keeps a high NC effect.

In addition, the noise reduction performance in passive is increasing with the above -mentioned spiral dot PRO earpiece.In addition, the NC function can be turned on even during calls, and even in a noisy environment, calls can be comfortably called.

In response to the increase in the number of people who talk with the mask on, the mask mode is also installed.When the user turns on the same function, he will clear his own voice to the other party.

By adopting Qualcomm's CVC noise canceling technology and a high -performance MEMS microphone, the noise of the call is reduced.On/off the call microphone is also possible on the earphone side, and you can mute the microphone without operating a smartphone.

Either left and right can talk with only one ear, and volume can be operated on either.It is convenient for online conferences.

Equipped with a high -performance LDS antenna to improve communication performance.It also supports Qualcomm's left and right simultaneous connection technology "TrueWiress Mirroring".With a single touch of the housing, it is also equipped with a touch and talk function that captures the surrounding sounds while lowering the volume of the music.

In order to enhance the wearing feeling, a case designed with a curve along the ears is used, and a shape that is held with the ear and face is adopted.

Although there is no smartphone app for cooperation, the touch operation on the earphone side can operate all of the various functions without an application.The appropriate operation mode is automatically selected by the mounting sensor.It also prevents touch of touch.

The battery duration is up to 9 hours for earphones alone.By using earphones and charging cases together, you can play up to 27 hours.With the K2 technology and noise canceling turned on, the playback time for the earphone alone is 4 hours.