Introducing a bracket that attaches an external back camera to the rear glass and uses it ... No drilling required

Masashinoboru MAXWIN, which sells car accessories, has released a general-purpose bracket "DVR-OP2 / DVR-OP3" that allows you to easily install a back-up camera installed outside the vehicle inside the vehicle.

The drive recorder is becoming an indispensable item due to the tendency of traffic troubles that have occurred frequently in recent years, but in the case of a separate front and rear camera, installing the rear camera is quite troublesome, including wiring.

This product is a general-purpose bracket that allows you to easily install the rear camera by simply attaching it to the rear glass. ) Are available in two types.

@RolandPaterson @charlottevslife That's our jobs as driving instructors, we teach how to pass cyclists safe and how… https://t.co/qvG1Oog2XV

— Craig atkin Tue May 18 07:20:19 +0000 2021

Installation is as simple as sticking it on the rear glass with strong double-sided tape, and a mounting driver for fixing the angle is also included. In addition to being able to attach an externally mounted rear camera weighing up to 60 g, it can be installed not only on the rear glass but also on the windshield and rear quarter glass because it can be freely adjusted to the angle of the glass surface to be installed, such as cameras and GPS antennas. It can also be applied.

Some back-up cameras installed in the car require screws to be fixed to the roof cover, but this product eliminates the need for troublesome and uneasy drilling.

Product specifications Material: Reinforced ABS Weight: Up to 60g DVR-OP2 Contents: Double-sided tape pedestal x 1, Rear camera screw fixing plate x 1, Rear camera sticking fixing plate x 1, Mounting tool x 1 set DVR-OP3 Contents: Bracket × 1, double-sided tape × 1, fixing screw 1 set, mounting tool × 1 set